This item is a direct replacement for the Moates G2 Memory Adapter

Assembled and Fully Tested in the USA.

The GM2 adapter allows you to replace your stock chip holder with a standardized 28-pin chip socket that is compatible with the newer flash chips in many GM TBI applications. If the original application accepted a 24-pin chip such as a 2732A, then this adapter will allow you to upgrade to new Flash chips such as the AT29C256 and 27SF512.

We highly recommend sending your ECM in for the $25 install service as removing the existing PROM and socket can be troublesome for some without the proper skills/tools and could result in the damage of your ECM (lifted pads, broken traces, etc. That will require professional repair that will likely cost more than $25)

This GM2 will work if your orginal ECM had a leg spacing of 0.60". For the GM2 version that has a leg spacing of 0.45", (Contact us for more info) Some ECM's were factory installed with leg spacing of 0.45", others ECM's were factory installed with 0.60" leg spacing.

In order to accurately process your order, you will need to verify which version of the GM2 your ecu is compatible with.

Note: Soldering required (see product web page)

OPTIONS:

• INSTALLATION SERVICE? select "Mail in - install service" as add on before adding to cart. The cost is $25 and should be used if your not comfortable with a soldiering iron. Order and we will provide you with our address to ship your PCM to us and we will solder in adapter and return to you. Standard turn around time currently is 1-2 business days.
• ZIF SOCKET: If you add the ZIF socket option(as seen in last picture), we will install/solder in the ZIF socket instead of the normal socket.** The ZIF Socket helps reduce chip bent pins during removal/reinstall over and over, the lever lets you easily install and remove chip many over and over.
• SST Chip add-on: if you add more than 1 chip here, you get a discounted rate for chip 2 & 3, vs paying for chips on the normal product page.
• Add on option "Prepaid Shipping Label" (This is for shipping TO US):  Pick this option to get a shipping label at our discounted rate, you then take your ECM and place in a USPS Medium Flat Rate box and drop off at post office to ship to us. (Note: with this option you must use the USPS Flat rate medium box, does not work with plain/random boxes)

Optional: Click HERE to browse a selection of compatible chips.

Designed, Assembled and Fully Tested in the USA.