When is my order going to ship? Please see our Delivery Info Page that has our schedule, holiday closures, and will answer most questions.
You can also click here to view the status updates page to see if there are any updates affecting normal Shipping or ECU Services times.
ATTENTION: Messages (Website, email, socials, Phone) will be answered ASAP! We are extremely busy at the moment and working our best to get all orders out asap, and all messages answered ASAP! Thank you for your understanding!

  • Your shopping cart is empty!

  • Moates Socket Booster

Moates Socket Booster

DISCONTINUED: Our REPLACEMENT HERE

The SocketBooster improves the signal conditioning at your chip or emulation socket. This is an active circuit which boosts the address and data information to and from your target ECU. This is a great fix for that flickering SES light on the old GM TBI setups (747, etc). This also seems to help out with a lot of applications that use older Hitachi/Mitsubishi processors such as DSM, 8 bit Nissan Z31/Z32/R32, etc.  Drives the information more cleanly across the ribbon cable, allowing longer cable runs (3+ feet). Facilitates both remote emulation (when used with Ostrich 2.0) or remote-mount chip installation (when used with EMUC-series emulation cable and Chip Extender 1.0 with optional S2 socket available separately).
 
The unit mounts where your chip would normally go in the ECU. You can solder it in directly or snap it into a machine-tooled or large-level ZIF socket (may need to bend handle slightly). Then, you snap down into the top of it with either a chip, emulation cable, or ZIF. If using a ZIF, you may need an additional 28-pin DIP (see product D2) to allow for good spacing away from the switch.
 
The switch is to select between 24 or 28 pin modes in terms of target device requirements. All orientations are clearly marked on the PCB.
 
Please note: The socket booster is REQUIRED for successful use of the Ostrich 2.0 with 24-pin applications such as the GM TBI OBD1 C3 1227747 ECUs.
 
Also note: This product can be used as a replacement for the G2, since it can be applied as a 24-to-28-pin adapter/booster.

Write a review

Note: HTML is not translated!
    Bad           Good

Moates Socket Booster

  • Brand: Moates
  • Product Code: moates-socket-booster
  • Availability: In Stock

  • $40.00 USD


0 reviews / Write a review

Tags: moates, socket, booster

OFF ROAD USE NOTICE

Items sold through boostednw.com including tuning products may be designed for off-road/race use only, and are not applicable for vehicles in states that require pollution controlled vehicles. California (CARB) & other states prohibit the sale or use of some aftermarket parts, including those that tamper with, modify or defeat emissions systems in any 1966 and newer vehicles. BoostedNW LLC prohibits the use of these products on emission controlled vehicles. These parts are sold for OFF ROAD, RACE-ONLY, ground-vehicle use only in a controlled environment.

BoostedNW LLC does not implicitly or explicitly confirm the legality of using any products it sells on public roads. Customers are solely responsible for ensuring all products purchased are used in a legal manner.